ZTE Blade A530 Stock Firmware (Flash File) - Firmware File
Official ZTE Blade A A530 (P639F10 MediaTek MT6739) Stock Rom
If you are looking for a way to restore your ZTE Blade A A530 to its original condition, or if you want to fix some software issues on your device, then you may need to flash the official stock ROM. In this article, we will show you how to download and install the official stock ROM for ZTE Blade A A530, as well as how to troubleshoot some common problems that may arise after flashing. But first, let's see what is a stock ROM and why you may need it.
Official ZTE Blade A A530 (P639F10 MediaTek MT6739) Stock Rom
What is a stock ROM and why you may need it
A stock ROM is the operating system that comes pre-installed on your device by the manufacturer. It is also known as the firmware or the factory software. It contains all the necessary files and settings to run your device smoothly and securely. It also includes some features and apps that are specific to your device model and brand.
There are many reasons why you may need to flash the stock ROM on your device. Some of them are:
You want to unroot your device or remove any custom modifications that you have made.
You want to fix some software issues such as bootloop, stuck on logo, or black screen.
You want to bypass Google account verification or FRP lock that prevents you from accessing your device after a factory reset.
You want to upgrade or downgrade your Android version to a different one.
You want to restore your device to its original state for warranty purposes or for selling it.
Flashing the stock ROM can help you solve these problems and improve your device performance and stability. However, flashing the stock ROM also has some risks and drawbacks. Some of them are:
You may lose your data and settings if you don't backup them before flashing.
You may void your warranty if you flash an unofficial or modified stock ROM.
You may brick your device if you flash a wrong or corrupted stock ROM.
You may lose some features or customizations that you have added to your device.
Therefore, before you flash the stock ROM, you should make sure that you have a valid reason and that you follow the instructions carefully. You should also backup your data and charge your battery sufficiently. Now, let's see what is the ZTE Blade A A530 and its main features.
What is the ZTE Blade A A530 and its main features
The ZTE Blade A A530 is a low-end smartphone that was launched in 2018. It has a 5.45-inch IPS LCD display with a resolution of 720 x 1440 pixels and an aspect ratio of 18:9. It is powered by a MediaTek MT6739 chipset with a quad-core Cortex-A53 CPU clocked at 1.5 GHz and a PowerVR GE8100 GPU. It has 2 GB of RAM and 16 GB of internal storage, which can be expanded up to 128 GB via a microSD card. It runs on Android 8. 0) and has a 2660 mAh battery. It has a 13 MP rear camera with LED flash and a 5 MP front camera. It supports dual SIM, 4G LTE, Wi-Fi, Bluetooth, GPS, and FM radio. It also has a 3.5 mm headphone jack and a micro USB port. It measures 146.3 x 69.2 x 8.5 mm and weighs 140 grams. It is available in black and blue colors.
The ZTE Blade A A530 is a decent smartphone for its price range, but it may not be able to handle heavy tasks or games smoothly. It may also have some software bugs or compatibility issues that may affect its performance and functionality. That's why you may want to flash the official stock ROM on your device to fix these problems and enjoy a better user experience. Here is how to do it.
How to download and install the official stock ROM for ZTE Blade A A530
In order to flash the official stock ROM on your ZTE Blade A A530, you will need some requirements and precautions, as well as the download links and instructions for the stock ROM and the flashing tool. Here are the details.
Requirements and precautions
Before you proceed with the flashing process, you will need to prepare some things and take some precautions. Here are the requirements and precautions for flashing the stock ROM on your ZTE Blade A A530:
A Windows PC or laptop with an internet connection.
A USB cable to connect your device to your PC.
A backup of your data and settings, as flashing the stock ROM will erase everything on your device.
A fully charged battery or at least 50% of battery level, as flashing the stock ROM may take some time and consume some power.
A compatible stock ROM file for your device model and region, as flashing a wrong or incompatible stock ROM may brick your device.
A compatible flashing tool for your device chipset, as different devices may require different tools to flash the stock ROM.
Some patience and caution, as flashing the stock ROM may involve some risks and challenges.
Once you have these requirements and precautions ready, you can proceed with the download links and instructions for the stock ROM and the flashing tool.
Download links and instructions
The official stock ROM for ZTE Blade A A530 is based on Android 8.0 Oreo and has the build number P639F10V1.0.0B01. It is compatible with the MediaTek MT6739 chipset and can be flashed using the SP Flash Tool. You can download the stock ROM file and the SP Flash Tool from the links below:
File nameFile sizeDownload link
ZTE_Blade_A_A530_MT6739_20180426_8.1.zip1.4 GB
SP_Flash_Tool_v5.1952_Win.zip57 MB
After downloading these files, you will need to extract them using a file extractor program such as WinRAR or 7-Zip. You will get a folder containing the stock ROM files and another folder containing the SP Flash Tool files. You will need these files for the installation steps.
Installation steps and screenshots
Now that you have downloaded and extracted the stock ROM and the SP Flash Tool files, you can follow these steps to flash the stock ROM on your ZTE Blade A A530:
On your PC, open the SP Flash Tool folder and run the flash_tool.exe file as administrator.
On the SP Flash Tool window, click on the Download tab and then click on the Choose button next to the Scatter-loading File option.
Navigate to the folder where you extracted the stock ROM files and select the MT6739_Android_scatter.txt file.
The SP Flash Tool will load all the partitions of the stock ROM. Make sure that all of them are checked except for Preloader, as flashing Preloader may brick your device.
Click on the Download button at the top of the SP Flash Tool window.
Turn off your device and remove the battery if possible. Then connect it to your PC via USB cable while holding down the Volume Down or Volume Up button.
The SP Flash Tool will detect your device and start the flashing process. You will see a red bar, followed by a yellow bar, and finally a green circle with a check mark, indicating that the flashing is successful.
Disconnect your device from your PC and put back the battery if you removed it. Then turn on your device and wait for it to boot up. It may take some time for the first boot, so be patient.
Congratulations, you have successfully flashed the official stock ROM on your ZTE Blade A A530. You can now enjoy the original features and performance of your device.
Here are some screenshots of the SP Flash Tool and the stock ROM flashing process:
How to troubleshoot common issues after flashing the stock ROM
Flashing the stock ROM on your ZTE Blade A A530 should fix most of the software issues that you may have on your device. However, sometimes you may encounter some problems after flashing the stock ROM, such as bootloop, stuck on logo, or black screen, SIM card not detected or network error, Google account verification or FRP lock, camera or other apps not working properly, etc. Here are some possible solutions to these issues:
Bootloop, stuck on logo, or black screen
If your device is stuck in a bootloop, meaning that it keeps restarting without reaching the home screen, or if it is stuck on the logo or a black screen, then you may need to perform a factory reset or a wipe data/cache. This will erase all your data and settings, so make sure that you have a backup before doing this. Here are the steps to perform a factory reset or a wipe data/cache:
Turn off your device and press and hold the Volume Up and Power buttons simultaneously until you see the recovery mode menu.
Use the Volume buttons to navigate and the Power button to select. Choose Wipe data/factory reset and confirm with Yes.
Wait for the process to complete and then choose Reboot system now.
Your device should boot up normally now. If not, you may need to flash the stock ROM again using the SP Flash Tool.
SIM card not detected or network error
If your device does not recognize your SIM card or if you have no network signal or data connection after flashing the stock ROM, then you may need to fix the IMEI number of your device. The IMEI number is a unique identifier for your device that is used by the network providers to authenticate your device. Sometimes, flashing the stock ROM may corrupt or erase the IMEI number of your device, causing network issues. Here are the steps to fix the IMEI number of your device:
On your PC, download and install the SN Write Tool from .
On your PC, open the SN Write Tool folder and run the SN Writer.exe file as administrator.
On the SN Write Tool window, click on the ComPort button and select USB VCOM.
Click on the Target Type button and select Smartphone.
Click on the System Config button and check IMEI, BT Address, and Wifi Address.
Click on MD1_DB button and select the BPLGUInfoCustomAppSrcP_MT6739_S00_MOLY_LR12A_R2_MP_V36_4G_P139 file from the stock ROM folder.
Click on AP_DB button and select the APDB_MT6739_S01_alps-mp-o1.mp1_W18.31 file from the stock ROM folder.
Click on Save button and then click on Start button.
Turn off your device and connect it to your PC via USB cable while holding down the Volume Down or Volume Up button.
The SN Write Tool will detect your device and start writing the IMEI number. You will see a green PASS message when it is done.
Disconnect your device from your PC and turn it on. You should have network signal and data connection now. If not, you may need to contact your network provider or service center for assistance.
Google account verification or FRP lock
If your device asks you to enter your Google account credentials or shows a FRP lock message after flashing the stock ROM, then you may need to bypass this security feature. FRP stands for Factory Reset Protection and it is a feature that prevents unauthorized access to your device after a factory reset. However, sometimes you may forget your Google account credentials or you may buy a second-hand device that has FRP enabled. In that case, you may need to bypass the FRP lock using a tool or a method that works for your device. Here are some possible ways to bypass the FRP lock on your ZTE Blade A A530:
Use the FRP Bypass APK tool from . This is a simple app that allows you to bypass the FRP lock by adding a new Google account to your device. You will need to download the app on a USB flash drive and connect it to your device using an OTG cable. Then you will need to follow the instructions on the app to bypass the FRP lock.
Use the GSM Flasher ADB Bypass FRP Tool from . This is a tool that allows you to bypass the FRP lock by using the ADB commands. You will need to download and install the tool on your PC and enable USB debugging on your device. Then you will need to connect your device to your PC via USB cable and run the tool as administrator. Then you will need to follow the instructions on the tool to bypass the FRP lock.
Use the ZTE FRP Remover Tool from . This is a tool that allows you to remove the FRP lock from your ZTE device by using a code. You will need to download and install the tool on your PC and connect your device to your PC via USB cable. Then you will need to run the tool as administrator and enter your device model and IMEI number. Then you will need to follow the instructions on the tool to remove the FRP lock.
These are some of the ways to bypass the FRP lock on your ZTE Blade A A530. However, these methods may not work for all devices or Android versions, and they may also have some risks or limitations. Therefore, you should use them at your own discretion and responsibility. If none of these methods work for you, you may need to contact ZTE customer service or a professional technician for assistance.
Camera or other apps not working properly
If your camera or other apps are not working properly after flashing the stock ROM, then you may need to clear the cache and data of these apps or update them to the latest version. Sometimes, flashing the stock ROM may cause some compatibility issues or glitches with some apps, especially if they are not from ZTE or Google. Here are the steps to clear the cache and data of these apps or update them to the latest version:
On your device, go to Settings > Apps & notifications > See all apps.
Find and tap on the app that is not working properly.
Tap on Storage & cache and then tap on Clear cache and Clear data buttons.
Go back and tap on Force stop button.
Restart your device and check if the app is working properly now.
If not, go to Google Play Store and check if there is an update available for the app. If yes, download and install it.
If still not, you may need to uninstall and reinstall the app or find an alternative app that works better with your device.
Conclusion
In this article, we have shown you how to download and install the official stock ROM for ZTE Blade A A530, as well as how to troubleshoot some common issues that may arise after flashing. We hope that this article has been helpful and informative for you, and that you have been able to restore your device to its original condition or fix some software problems on it.
Flashing the stock ROM can be a useful and effective way to improve your device performance and stability, as well as to solve some software issues that may affect its functionality. However, flashing the stock ROM also has some risks and drawbacks, so you should always backup your data and follow the instructions carefully before doing it. You should also make sure that you have a compatible stock ROM file and a compatible flashing tool for your device model and chipset.
If you have any questions or feedback about this article or about flashing the stock ROM on your ZTE Blade A A530, please feel free to leave a comment below. We would love to hear from you and help you out. Thank you for reading this article and happy flashing!
FAQs
Here are some frequently asked questions about flashing the stock ROM on ZTE Blade A A530:
What is the difference between stock ROM and custom ROM?
A stock ROM is the operating system that comes pre-installed on your device by and responsibility. If you have any questions or doubts about backing up your data, you can consult a professional or search online for more information and guidance.
How can I root my ZTE Blade A A530 after installing the stock ROM?
Rooting your device means gaining full access and control over your device system and settings. It allows you to customize your device, install apps that require root access, remove bloatware, etc. However, rooting your device also has some risks and drawbacks, such as voiding your warranty, exposing your device to security threats, causing system instability, etc. Therefore, you should only root your device if you know what you are doing and if you are willing to accept the consequences.
There are many ways to root your device, such as using a PC program, an app, or a custom recovery. Here are some of the most common ways to root your ZTE Blade A A530 after installing the stock ROM:
Use KingoRoot, iRoot, or One Click Root to root your device using a PC program. You will need to download and install the program on your PC and connect your device to your PC via USB cable. Then you will need to follow the instructions on the program to root your device.
Use KingRoot, Framaroot, or Towelroot to root your device using an app. You will need to download and install the app on your device and run it. Then you will need to follow the instructions on the app to root your device.
Use TWRP, CWM, or Philz to root your device using a custom recovery. You will need to download and install the custom recovery on your device and boot into it. Then you will need to flash the SuperSU or Magisk zip file from the custom recovery to root your device.
These are some of the ways to root your ZTE Blade A A530 after installing the stock ROM. However, these methods may not work for all devices or Android versions, and they may also have some limitations or risks. Therefore, you should use them at your own discretion and responsibility. If none of these methods work for you, you may need to search online for more information and support for rooting your device.
How can I update my ZTE Blade A A530 to the latest Android version?
Updating your device to the latest Android version can bring you some new features, improvements, bug fixes, and security patches. However, updating your device also has some risks and drawbacks, such as losing some features or customizations, causing compatibility issues, consuming more battery or memory, etc. Therefore, you should only update your device if you are sure that it is compatible and beneficial for you.
There are two ways to update your device to the latest Android version: using the official OTA update or using a custom ROM. Here are the details of each way:
Use the official OTA update to update your device using the official update from ZTE. This is the easiest and safest way to update your device, as it does not require any technical skills or tools. However, this way may not be available for all devices or regions, and it may take some time for ZTE to release the update. Here are the steps to use the official OTA update:
On your device, go to Settings > System > System update.
Check if there is an update available for your device. If yes, download and install it.
Wait for the update process to complete and restart your device.
Your device should be updated to the latest Android version now.
Use a custom ROM to update your device using a modified version of Android from third-party developers or enthusiasts. This is a more advanced and experimental way to update your device, as it requires some technical skills and tools. However, this way may offer you some features and options that are not available on the official update. Here are the steps to use a custom ROM:
On your PC, download and install a compatible custom ROM file for your device model and chipset from .
On your P