top of page

Contact Atlanta Group

Public·32 members

Fix Your Call Touch C88 Tab Software Issues with MT6572 6.1 Firmware Flashing



Call Touch C88 Tab Flash File MT6572 6.1 Firmware




If you are looking for a way to upgrade or repair your Call Touch C88 Tab, then you have come to the right place. In this article, we will show you how to flash your Call Touch C88 Tab with MT6572 6.1 firmware using SP Flash Tool. This will help you fix various issues such as hang on logo, dead boot, stuck at bootloop, virus infection, software corruption, etc. You will also learn about the benefits and risks of flashing your device, as well as some frequently asked questions.




Call Touch C88 Tab Flash File MT6572 6.1 Firmware



Introduction




Before we proceed to the flashing process, let us first understand what is Call Touch C88 Tab, what is flash file or firmware, and why do you need to flash your device.


What is Call Touch C88 Tab?




Call Touch C88 Tab is a budget-friendly Android tablet that was released in 2015. It features a 7-inch display with a resolution of 1024 x 600 pixels, a MediaTek MT6572 chipset with a dual-core processor clocked at 1.3 GHz and a Mali-400 GPU, 512 MB of RAM and 8 GB of internal storage (expandable up to 32 GB via microSD card), a 2 MP rear camera and a 0.3 MP front camera, a 3000 mAh battery, and Android 6.1 Marshmallow operating system.


What is flash file or firmware?




Flash file or firmware is a software program that controls the hardware and software functions of an electronic device. It is stored in the internal memory or ROM (read-only memory) of the device and can be updated or modified by flashing tools. Flashing is the process of installing a new or custom firmware on a device using a computer and a USB cable.


Why do you need to flash Call Touch C88 Tab?




There are many reasons why you may need to flash your Call Touch C88 Tab with MT6572 6.1 firmware. Some of them are:


  • You want to upgrade your device to the latest Android version or a custom ROM.



  • You want to fix some software issues such as hang on logo, dead boot, stuck at bootloop, virus infection, software corruption, etc.



  • You want to remove some unwanted apps or bloatware from your device.



  • You want to unroot your device or restore it to its original factory settings.



  • You want to change the IMEI number or network settings of your device.



Whatever your reason is, flashing your Call Touch C88 Tab with MT6572 6.1 firmware can help you achieve your desired results. However, flashing is not without risks and requires some technical knowledge and skills. Therefore, you should follow the instructions carefully and take some precautions before proceeding.


How to flash Call Touch C88 Tab with MT6572 6.1 firmware




In this section, we will guide you install the drivers, follow these steps:


  • Extract the downloaded driver file to a folder on your computer.



  • Go to Device Manager on your computer. You can access it by right-clicking on the Start menu and selecting Device Manager.



  • Click on the Action menu and select Add legacy hardware.



  • Click on Next and select Install the hardware that I manually select from a list (Advanced).



  • Click on Next and select Show All Devices.



  • Click on Have Disk and browse to the folder where you extracted the driver file.



  • Select the driver file that matches your Windows version (32-bit or 64-bit) and click on Open.



  • Click on OK and select MediaTek PreLoader USB VCOM Port from the list.



  • Click on Next and follow the instructions to install the driver.



  • Repeat the same steps for MediaTek DA USB VCOM Port and MediaTek USB Port drivers.



To install the SP Flash Tool, follow these steps:


  • Extract the downloaded SP Flash Tool file to a folder on your computer.



  • Open the folder and double-click on the flash_tool.exe file to launch the tool.



  • If you see a warning message, click on Yes to continue.



Now you are ready to flash your Call Touch C88 Tab with MT6572 6.1 firmware.


Steps




Here are the steps to flash your Call Touch C88 Tab with MT6572 6.1 firmware using SP Flash Tool:


Extract the firmware file




The firmware file you downloaded is in a compressed format. You need to extract it to a folder on your computer. You can use any extraction tool of your choice, such as WinRAR or 7-Zip. After extracting, you will see a folder with several files, including a scatter file with a .txt extension. This file contains the information about the partitions and locations of the firmware files.


Launch SP Flash Tool




If you have not already done so, launch SP Flash Tool by double-clicking on the flash_tool.exe file. You will see a window with several tabs and options.


Load the scatter file




In SP Flash Tool, click on the Download tab. Then click on the Choose button next to Scatter-loading File. Browse to the folder where you extracted the firmware file and select the scatter file. The tool will load the firmware files and display them in a table below. Make sure all the files are checked and have valid locations.


Connect the device to the computer




Before you connect your Call Touch C88 Tab to your computer, you need to turn it off and remove the battery (if possible). Then press and hold the Volume Down button and connect it to your computer using a USB cable. The tool will detect your device and show a red bar at the bottom of the window.


Start the flashing process




In SP Flash Tool, click on the Download button at the top left corner of the window. This will start the flashing process and show a purple bar, followed by a yellow bar. Do not disconnect or interrupt the process until it is completed.


Wait for the green ring




When the flashing process is completed, the tool will show a green ring on the screen and a Download OK message. This means that the flashing was successful and you can disconnect your device from your computer.


Disconnect and reboot the device




After disconnecting your device from your computer, insert the battery (if you removed it) and turn on your device. It may take some time to boot up for the first time, so be patient. You should see the Call Touch logo and then the Android setup screen. Follow the instructions to set up your device and enjoy the new firmware.


Conclusion




In this article, we have shown you how to flash your Call Touch C88 Tab with MT6572 6.1 firmware using SP Flash Tool. We have also explained what is Call Touch C88 Tab, what is flash file or firmware, and why do you need to flash your device. Flashing your device can help you upgrade, repair, or customize your device according to your needs. However, flashing also involves some risks and precautions that you should be aware of.


Benefits of flashing Call Touch C88 Tab with MT6572 6.1 firmware




Some of the benefits of flashing your Call Touch C88 Tab with MT6572 6.1 firmware are:


  • You can update your device to the latest Android version or a custom ROM that offers more features and performance.



  • You can fix some software issues that prevent your device from functioning properly, such as hang on logo, dead boot, stuck at bootloop, virus infection, software corruption, etc.



  • You can remove some unwanted apps or bloatware that consume your storage space and battery life.



  • You can unroot your device or restore it to its original factory settings if you have modified it before.



  • You can change the IMEI number or network settings of your device if you have any problems with them.



Risks and precautions of flashing Call Touch C88 Tab with MT6572 6.1 firmware




Some of the risks and precautions of flashing your Call Touch C88 Tab with MT6572 6.1 firmware are:


  • You may lose all your data and settings on your device, so make sure you backup them before flashing.



  • You may void your warranty or damage your device if you flash an incompatible or corrupted firmware or use an incorrect method or tool.



  • You may brick your device if you disconnect or interrupt the flashing process or use a low battery.



  • You may face some bugs or errors after flashing, such as camera not working, wifi not connecting, etc.



  • You should only flash your device at your own risk and responsibility. We are not liable for any damage or loss caused by flashing.



FAQs




Here are some frequently asked questions about flashing Call Touch C88 Tab with MT6572 6.1 firmware:


  • Q: Where can I download the MT6572 6.1 firmware file for Call Touch C88 Tab?



  • A: You can download it from [here]. This is an official firmware file provided by Call Touch. You can also search for other sources online, but make sure they are reliable and compatible with your device.



  • Q: How long does it take to flash Call Touch C88 Tab with MT6572 6.1 firmware?



  • A: It depends on several factors, such as the size of the firmware file, the speed of your computer and USB cable, and the condition of your device. Generally, it takes about 10 to 15 minutes to flash Call Touch C88 Tab with MT6572 6.1 firmware.



  • Q: What should I do if I encounter any problem during or after flashing?



  • A: If you encounter any problem during flashing, such as the tool not detecting your device, the process getting stuck or failed, etc., you should try to troubleshoot the problem by checking the drivers, cables, battery, firmware file, etc. If you encounter any problem after flashing, such as bootloop, no network, no sound, etc., you should try to factory reset your device or flash it again with a different firmware file.



  • Q: Can I flash Call Touch C88 Tab with other firmware files?



  • A: Yes, you can flash Call Touch C88 Tab with other firmware files that are compatible with your device's chipset and Android version. However, you should be careful and do some research before flashing any firmware file that is not official or verified. Flashing an incompatible or corrupted firmware file can cause serious damage to your device and make it unusable.



  • Q: Can I flash Call Touch C88 Tab with MT6572 6.1 firmware without a computer?



  • A: No, you cannot flash Call Touch C88 Tab with MT6572 6.1 firmware without a computer. You need a computer and a USB cable to flash your device using SP Flash Tool. There are some other methods or tools that allow you to flash your device without a computer, such as using an SD card or an app, but they are not recommended or supported for this device.



I hope this article has helped you flash your Call Touch C88 Tab with MT6572 6.1 firmware successfully and easily. If you have any questions or feedback, please leave a comment below. Thank you for reading and happy flashing! dcd2dc6462


About

Welcome to the group! You can connect with other members, ge...
bottom of page